Views: 18 Author: Leapion Publish Time: 05-27-2022 Origin: https://www.leapion.com/
If the lens used by the laser cutting machine is not well protected or maintained improperly, it is easy to burn or crack the lens.
If the cutting lens frequently burns out, it is a quality problem or it is usually not paid attention to maintenance. Some manufacturers use ordinary or inferior lenses in order to save costs. In addition, the lenses themselves are vulnerable accessories. After receiving the goods, disassembly and assembly accidentally touch the lenses, or the collision between the goods and other items will also have a certain impact on the lenses.
The usage rate of the lens, the thickness of the sheet to be cut, and the stability of the air pressure all have a certain impact on the lens. When using the cutting machine, the blowing delay can be increased. When cutting the workpiece, pay attention to adjusting the focal length.
Remember the number of perforations in the corresponding time, because the higher the output frequency, the easier it is to perforate and sputter the lens. Before perforation, you must set a good time.
Dust should be removed after work every day. Be careful when cleaning. Do not damage the lens when cleaning. When replacing a new lens, dust should be removed before use.
Check whether there are stains and liquids on the lens every day. When the cutting machine is working, it will generate gas to blow away the residue generated during the cutting process and prevent the residue from entering the lens, which is also a good protection for the lens.
Finally, while checking the lens, it is also necessary to check whether the air compressor dryer is running normally.
To sum up, you need pay attention to the parameters and focal length when cutting,and check the lenses everyday and keep the environment clean,so as to avoid the phenomenon of frequent burnout of the lens of your laser cutting machine, so that it can be reused for a long time and increase its life.
For more information on laser cutting machines, please contact Leapion Laser directly.
