The disadvantages of traditional MIG welding and TIG welding include: certain pre-welding preparations and settings are usually required; extremely high heat is generated during welding, resulting in a large heat-affected zone, materials distortion, and the welding quality results will be unsati
READ MORELaser cutting is to irradiate a laser beam on the material to be cut, so that the material is heated, melted, and vaporized, and the melt is blown away with high-pressure gas to form a hole, and then the beam moves on the material, and the hole continuously forms a slit. In general thermal c
READ MORELubricants for rails are divided into three categories: (1) Rail oil (slide oil)(2) Dual-purpose oil for hydraulic rails (3) Grease. The most important characteristics of rail oil are its strong adhesion and water washout resistance, as well as extremely strong resistance to extreme pressure.
READ MORELeaping machinery has been engaged in the application field of high-power laser technology. At present, the laser cutting machines used for material cutting can be roughly divided into two types: fiber laser cutting machines and CO2 laser cutting machines. As the mainstream traditional laser cut
READ MOREA pickling board is an intermediate product with the high-quality hot-rolled sheet as raw material, after removal of the oxide layer, trimming, and finishing by the pickling unit, the surface quality, and usage requirements are between those of a hot-rolled sheet and cold-rolled sheet. Under th
READ MOREFiber Laser Cutting Machine in Argentina customer factoryOn-site cutting pictures
READ MORE