Laser cutting machine
You are here: Home / News / For cutting laser cutting machine, the required size is less than 20 mm

For cutting laser cutting machine, the required size is less than 20 mm

Views:31     Author:heyu     Publish Time: 2020-07-31      Origin:Fiber laser cutting machine

  What is the cutting thickness of laser cutting machine? At present, the cutting thickness of laser cutting machine is generally less than 40mm. Compared with other cutting methods, it has obvious advantages in cutting materials with required size less than 20mm.


  At present, the cutting thickness of laser cutting machine is generally less than 40mm. Compared with other cutting methods, it has obvious advantages in cutting materials with required size less than 20mm.


  What is the working principle of laser cutting machine?


  Laser cutting is a kind of thermal cutting method that uses focused high-power density laser beam to irradiate the workpiece, so that the material in the irradiated area can melt, vaporize, ablate or reach the ignition point. At the same time, the molten material is blown out by the high-speed airflow coaxial with the beam. The laser cutting machine moves the spot irradiation position through the numerical control mechanical system, so as to realize the thermal cutting of the workpiece.


  Is laser cutting machine operation dangerous?


  Laser cutting is a very environmentally friendly cutting method, generally speaking, there is no harm to the body. Compared with ion cutting and oxygen cutting, the dust produced by laser cutting is less, the light of laser cutting machine is weak, and the noise of laser cutting machine is small. However, if the correct safe operation method is not followed, it will also cause personal injury or damage to the machine.


  1. Be careful of flammable materials when using the machine. Some materials are not allowed to be cut on the laser cutting machine, including foam core materials, any PVC materials, high reflective materials, etc.


  2. During the working process of the machine, the operator is forbidden to leave without permission, so as to avoid unnecessary loss.


  3. Don't stare at the laser processing operation. It is forbidden to observe the laser through binoculars, microscopes, magnifiers, etc.


  4. Do not store explosive and flammable materials in laser processing area.

LASER Product Recommendations

The data are for reference only

  •  

LC Laser Cutting
& Engraving Machine

LC-MN Laser Cutting
& Engraving Machine
LF-ST Dual-use Sheet & Tube
Fiber Laser Cutting Machine
LF-H Flatbed Fiber Laser
Cutting Machine
LF-STE Double platforms Sheet & Tube
Fiber Laser Cutting Machine
LF-STP Enclosed Sheet & Tube
Fiber Laser Cutting Machine
LF-E Entry-level Economy
Fiber Laser Cutting Machine
LF-Mi High Precision
Fiber Laser Cutting Machine
LF-PE Enclosed Protective
Fiber Laser Cutting Machine
LF-T Tube fiber laser cutting machine
LC-Mi-Mini-Laser-Engraving

LF-EX Exchange Platform
Fiber Laser Cutting Machine

LF-AT-Automatic-loading-tube

About Us

Contact Us

  Tel : +86-531-8898-2620
   Email : info@leapion.com
Copyright  2019 Shandong Leapion Machinery Co,.Ltd.  All Rights Reserved.