Views: 207 Author: Site Editor Publish Time: 08-07-2021 Origin: Site
The laser engraving machine uses laser to complete the engraving or cutting process. The laser engraving machine has a wide range of use, and the engraving accuracy is higher and the engraving speed is faster. It is a numerically controlled graphics drive working mode. To complete the graphics drive, a computer and related graphics software must be configured. Sometimes, the software of the laser engraving machine malfunctions, which will directly affect the processing effect and processing efficiency. So, today Leapion Laser will share with you how to solve the software problem of laser engraving machine.
1. The graphics formats supported by the laser engraving machine are AI, BMP, PLT, DXF, DST, etc. The corresponding graphics software includes CorelDiaw, CAD, Wentai, PhotoShop. Tajima embroidery software, etc.
2. Laser engraving is generally done in bitmap format, BMP format, usually PhotoShop; laser cutting is in vector format, namely AF, PLT, DXF format, Al and PLT format is processed by CorelDra+ mapping software, and DXF format is CAD The saving format of the software. Wentai software is mainly used to process text, and it is also in vector format.
3. The operating system of the laser engraving machine itself, and its installation software can also complete the production of a small amount of simple graphics.
4. The computer requirements are relatively simple, that is, an ordinary home computer, either a desktop or a notebook.
5. According to the actual engraving or cutting needs, use the corresponding graphics software to make the corresponding bitmap or vector diagram, import it into the operating system of the laser engraving machine, press the start button, and the laser engraving machine can automatically follow your production The graphics are used to engrave or cut the workpiece to meet the processing requirements.
Question 1: What should I do if there is an error in the graphic display of the laser engraving machine software, or the graphic is not displayed directly?
Reasons and solutions:
1. The lines used in drawing are not defaulted: some drawing software lines are not recognized by the laser engraving machine, so they are not supported. In this case, you need to redraw the drawing and use other drawing tools when processing the lines.
2. The cause of the laser cutting machine software itself: It may be that there is a problem in the software installation process, which causes the software installation to be unsuccessful. Therefore, there is a graphic display error or no display. The solution is to reinstall the software and try again.
3. When the laser engraving machine makes an error during engraving and cutting, there are generally the following two reasons:
1) Signal interference
The reason why the laser engraving machine can cut according to the specified pattern is that the graphic signal is converted into a digital signal. If the external interference of the machine is too large, it will affect the control board and cause the system program error. If this happens, we must connect the ground wire to reduce the interference of external electrical signals.
Motherboard reason
If there is a problem with the motherboard, the signal sent out when the machine is working may be abnormal, or a cedar tree problem may occur. Replacing the motherboard can solve the problem.
Question 2: There are gradual changes and double phenomena during laser engraving
This phenomenon occurs when the slope of the lettering is small. Usually the slope of the "wide" setting is too large, which leads to calculation errors. To solve this situation, please set a small slope of "wide". To
Question 3: Graphics can only move in one direction
If the graph can only move in one direction, please click "Shift" or "Ctrl" to restore. To
Question 4: PLT format cannot be engraved
There are two reasons, one is that the graph is not closed, and the other is that the graph is repeated.
Solution: Please use the "data detection" tool to detect this phenomenon.
Question 5: The size is different from the laser engraving and cutting sample
When there is a difference between the processing size and the laser engraving and cutting sample, open the "Laser Engraving Machine Set" item and adjust the pulse.
Question 6: Common computer problems
1) The font is gradually reduced, and the operating system should be reinstalled at this time;
2) The amount of data is too large to calculate the laser path, and the data parameters need to be corrected at this time;
3) The calculation path has not responded for a long time. In this case, please restart the computer.
The laser engraving machine adopts the integrated technology of light, machine and electricity and is integrated with the computer. It has the characteristics of high speed and high efficiency. In addition, it is far superior to traditional processing equipment in terms of accuracy, quality and finish. If there is a problem with the software and computer during use, you can refer to the above solutions. For more professional problems, we still recommend that professional maintenance personnel solve them.
Today, Leapion Laser shares so much, and more laser machine questions, welcome to consult Leapion Laser.
