Views: 32 Author: Site Editor Publish Time: 08-30-2021 Origin: Site
As we all know, typesetting is an important process in a laser cutting machine. If the typesetting is not correct, it will not only reduce work efficiency and waste processing materials, but also directly affect the cutting effect of the entire processed materials. Therefore, we should pay attention to the following 6 points when using the laser cutting machine to typesetting, and the Leapion laser will list them for you below.
When cutting the corners of thin steel plates at reduced speed, the laser will overheat and melt the corners. Generate a small radius at the corner to maintain the high-speed laser cutting, avoid the phenomenon of overheating and melting of the steel plate when cutting the corner, so as to obtain a good cutting quality, reduce cutting time, and increase productivity.
Generally, when cutting thick plates and hot plates, the distance between parts should be large, because the heat of the thick plate hot plate has a greater influence. When cutting corners and small graphics, it is easy to burn edges and affect the cutting quality.
In the process of cutting thicker plates, in order to make the slit joint well and prevent the start and end points, a transition line is often drawn at the beginning and the end of the cutting, respectively called the lead and the tail. The lead and the tail have no effect on the workpiece itself. It is used, so it should be arranged outside the scope of the workpiece. At the same time, pay attention not to set the lead wire in a sharp corner or other places that are not easy to dissipate. The connection between the lead and the slit should adopt a circular arc transition as far as possible to make the machine move smoothly and avoid the corner stall.
Co-edge two or more parts into a combination, and try to co-edge large quantities of regular graphics. Co-edge cutting can greatly shorten the cutting time and save raw materials.
In order to maximize production efficiency, many laser cutting equipment operate continuously for 24 hours, and use unmanned automatic loading/unloading devices, which can hit the tipped parts after cutting and cause damage to the cutting head and interruption of production. Larger loss. This requires attention when sorting:
1)Choose a suitable cutting path and detour the cut parts to reduce collisions.
2)Choose a better cutting route to reduce cutting time.
3) Automatically or manually combine multiple small parts with micro-connections. After cutting, the removed parts can easily disconnect the micro-connections.
After the parts are cut, the skeleton-like residual material on the worktable of the laser cutting equipment needs to be removed as soon as possible to facilitate subsequent cutting operations. For laser cutting equipment that does not have an automatic unloading device, the skeleton-shaped residual material can be cut into small pieces to facilitate quick removal. Thereby, the personal injury caused by the heavy and sharp-edged remnants of the operator is avoided.
Laser processing has been widely used in many metal processing industries. One of the benefits of laser processing is that it can design various graphics and realize flexible processing of complex parts. At the same time, using typesetting software to typeset reasonably can greatly improve cutting efficiency and quality. And reduce the consumption of raw materials.
Therefore, the above six precautions about the layout of the laser cutting machine, we should pay attention to it in the use process. For more professional questions about laser cutting machines, please contact Leapion Laser.
