Laser cutting machine
leapion news
You are here: Home / News / Maintenance of CNC Router

Maintenance of CNC Router

Views:4     Author:heyu     Publish Time: 2020-03-13      Origin:Site Inquire

  The routine maintenance of the NC router is very important. To form a good maintenance habit can make the NC router maintain a good state of responsibility and greatly extend the life of the NC router. Today, let's talk about the maintenance of CNC router in summer.

  If your NC router is not necessary temporarily, it should be refueled and emptied on demand to ensure the dexterity of the transmission system. After adding oil, walk back and forth slowly to ensure that the smooth oil can be evenly added to the guide rail and lead screw.

  For winter maintenance of CNC router, first clean up the waste on guide rail and lead screw, and then clean up the oil and waste on guide rail and lead screw. Because of the low temperature, the guide rail and the lead screw can be added with engine oil. It is better to add antifreeze engine oil.

  The influence of winter temperature on the CNC router is not great (, but because some customers add butter to the lead screw and forget to clean it in summer, the machine can not be opened every time when it is started up, and the temperature in some rooms is very low, although the engine oil is added, it is still frozen and the machine can not be operated. Therefore, the ambient temperature of the operation room should be guaranteed as much as possible, and it is better to reach the normal room temperature, at least the responsible personnel will not be very cold. Check the temperature applicable to the refueling range, and at least reach the maximum temperature. When the machine is not in production, if the room temperature is low, it is better to pour out the water in the water tank to avoid frostbite of the water tank and water pipe.

  Many customers often forget to change the water for the NC router pump, especially in autumn and summer, because of the high temperature outside, it is difficult to cool the spindle motor. Here we specially remind customers: cooling water is the necessary condition for the normal responsibility of the spindle motor. If the cooling water is too dirty, it will cause great harm to the motor, and ensure the cleanness of the cooling water and the normal responsibility of the pump. Pay attention to water level, never make water-cooled spindle motor appear water shortage scene, so that motor heat can not be exported in time. Pay attention to the ambient temperature. The water tank and water pipe are cracked due to the supercooling of the water temperature.leapion

LASER Product Recommendations

LC Laser Cutting
& Engraving Machine

LC-MN Laser Cutting
& Engraving Machine
LF-ST Dual-use Sheet & Tube
Fiber Laser Cutting Machine
LF-H Flatbed Fiber Laser
Cutting Machine
LF-STE Double platforms Sheet & Tube
Fiber Laser Cutting Machine
LF-STP Enclosed Sheet & Tube
Fiber Laser Cutting Machine
LF-E Entry-level Economy
Fiber Laser Cutting Machine
LF-Mi High Precision
Fiber Laser Cutting Machine
LF-PE Enclosed Protective
Fiber Laser Cutting Machine
LF-T Tube fiber laser cutting machine

LF-EX Exchange Platform
Fiber Laser Cutting Machine


Contact Us

  Tel : +86-531-8898-2620
   Email :

About Us

Copyright  2020 Shandong Leapion Machinery Co,.Ltd.  All Rights Reserved.