Tool maintenance and sharpening are also very important issues. When a job is finished, no matter how tired you are, you should put the tools together first, and then rest; if you want to use them again after a period of time, you should repair the tools, or apply oil (to prevent moisture and rust), and put them into toolbox or tool bag by category for next use. The cutter of NC router is just like human's hands. He can't do fine work without cherishing him. Let's talk about how to maintain the tool.
The first jacket should be of proper size, with cross-section, wear and tear, not round enough, and with taper in the inner hole. Otherwise, it will cause the handle to vibrate, which will not achieve the ideal carving effect.
The contact between the second jacket and the handle shall be mild. The handle shall not only be firmly inserted into the jacket but also be fastened. If the inner hole of the jacket is deformed due to long service time, the jacket shall be replaced immediately.
Thirdly, it is necessary to check the tool toughness frequently. If the tool is blunt, it should be replaced immediately, because not only the carving effect is not good, but also the tool will be broken.
Fourth, when using woodworking CNC router, it should be noted that the thickness of the machining should not exceed the thickness of the cutting edge, otherwise the cutter will still break.
The fifth is to use reasonable cutting speed for different materials.
The sixth cutting speed should be kept in balance, and the speed should be kept as consistent as possible, so as to achieve better results. The cutting process can not stay, and the correct use of woodworking CNC router tools should be completed in one go.
The seventh tool should be cleaned with a special cleaner. leapion
