What are the factors that affect the accuracy of laser cutting machine?

It is a common fault that the size error of laser equipment occurs in processing, which will affect the production efficiency and cost of users. However, for users, the error of cutting accuracy may not be the reason of the equipment. The following factors will also affect the cutting accuracy of laser cutting machine equipment:

1. Processed materials

The cutting accuracy will vary with different processing materials. Even for the same material, if the ingredients in the material are not identical, the cutting accuracy will be affected;

2. The size of laser spot condensation

If the precision of laser cutting machine is very high, it means that the spot is very small. In fact, the smaller the spot is, the higher the processing quality is;

3. The laser beam condenses in a cone shape

If the laser beam is tapered downward and the material thickness is large when the laser cutting machine is cutting, the cutting accuracy will be reduced and the gap will be very large;

4. Accuracy of worktable

The accuracy of the worktable is a very important factor to measure the accuracy of the laser generator. The accuracy of the worktable will also directly affect the cutting accuracy of the laser cutting machine;

After the above introduction, it is not difficult to find that, in addition to the equipment itself, the size of the facula, the thickness of the material and the accuracy of the worktable will affect the cutting accuracy of the equipment. Users should avoid these adverse factors when using the equipment, so that the quality and accuracy of the cut materials will be greatly improved. leapion