Laser Cutting Machine Blog

• The advantages of SMC pneumatic components compared to other brands

  The advantages of SMC pneumatic components compared to other brands Pneumatic components are performing work through the pressure or the force generated by gas expansion, that is, the components that convert the elastic energy of compressed air into kinetic energy. Such as cylinders, air motors, ste

  Laser Cutting Machine Blog August 04, 2022
• The difference between linear motor and "ball screw + servo motor"

  The linear motor was invented by the British in 1845, but the air gap of the linear motor at that time was too large and the efficiency was very low, so it could not be applied. After the 1970s, Kollmorgen was also launched, but its development was limited due to high cost and low efficiency. It

  Laser Cutting Machine Blog August 02, 2022
• The difference between the servo motor and stepper motor

  1. How to choose stepper and servo motors? It mainly depends on the specific application situation. In short, it is necessary to determine: the nature of the load (such as horizontal or vertical load, etc.), the requirements for torque, inertia, speed, accuracy, acceleration, and deceleration, and t

  Laser Cutting Machine Blog July 28, 2022
• Difference between screw transmission and rack transmission

  Both ball screws and racks belong to transmission tools and are widely used in industrial fields, but they are used in different ranges because of their different characteristics. Which transmission tool should we choose in actual work? Firstly, we have to have a deep understanding of the two, t

  Laser Cutting Machine Blog July 27, 2022
• Application of glass laser cutting technology

  As an important industrial material, glass is used in many industries of the national economy, such as home appliances, bathrooms, decoration, electronics, crafts, optics, construction, automobiles, photovoltaic industries, etc., small optical filters as small as a few microns, notebook computer

  Laser Cutting Machine Blog July 25, 2022
• Fiber laser cutting new process: high speed cutting carbon steel using oxygen, negative focus

  When it comes to the recently popular carbon steel cutting process in the fiber laser industry, it suddenly began to hot the high-speed cutting carbon steel using oxygen, negative focus. What makes this new cutting process better than the traditional positive focal length cutting of carbon st

  Laser Cutting Machine Blog July 21, 2022
• The principle of laser cutting machine

  The principle of laser cutting machineThe laser cutting process replaces the traditional knife with the invisible laser beam, with the characteristics of high precision, fast cutting, not limited to the cutting pattern, auto-typesetting saves materials, smooth cut, low processing cost and etc., it w

  Laser Cutting Machine Blog July 20, 2022
• Configuring an Air-conditioned Room for the Laser Source

  Option One: About configuring an air-conditioned room for the laser source, to make the laser source operate better and more stably and prolong its life of the laser source. The size of the air-conditioned room: width*length*height=2000MM*2500MM*2000MM, the space of the entire air-conditioned

  Laser Cutting Machine Blog July 14, 2022
• Debugging Method of Fiber Laser Cutting Ultra-thick Plate

  In recent years, the 10000watt Laser Cutting Machine has gradually gained popularity and application in the domestic sheet metal processing market due to its "high efficiency and high quality." However, there aren't many technicians who are familiar with the 10000-watt laser cutting machine and

  Laser Cutting Machine Blog July 13, 2022
• Anti-Condensation Guide in Summer

  The arrival of June means that summer is coming, and the temperature has risen significantly. At this time, it is the early summer. Although the scorching sun was not yet unbearable, the thunderstorms increased and the humidity was heavy. Frequent rainfall and a humid environment can easily lead

  Laser Cutting Machine Blog July 12, 2022