Configuring an Air-conditioned Room for the Laser Source

Option One:

    About configuring an air-conditioned room for the laser source, to make the laser source operate better and more stably and prolong its life of the laser source.

    The size of the air-conditioned room: width*length*height=2000MM*2500MM*2000MM, the space of the entire air-conditioned room is about 10m³,

    The dimension drawing of the air-conditioned room is shown in Figure 1 below.

Figure 1

The inlet of the water pipe and control line are shown in Figure 2;

Figure 2

The fiber optic cable outlet is shown in Figure 3;

Figure 3

Schematic diagram of the Air Conditioner installation, as shown in Figure 4;

Figure 4

    After the installation is completed, the overall effect drawing is shown in Figure 5, and the air-conditioned room should be well sealed around.

Figure 5

    In terms of air-conditioning, it is recommended: 1.5 hp (or 2 hp) Air Conditioner, dual temperature, with dehumidification function. It is recommended to choose an Air Conditioner of regular well-known brands.

Option Two:

    The size of the air-conditioned room: length*width*height=1500mm*1500mm*2000mm. The space of the whole air-conditioned room is about 4.5m³,

   

    The dimension drawing of the air-conditioned room is shown in Figure 6 below.

Figure 6

The inlet of the water pipe and control line are shown in Figure 7;

Figure 7

The fiber optic cable outlet is shown in Figure 8;

Figure 8

Schematic diagram of the Air Conditioner installation, as shown in Figure 9;

Figure 9

    In terms of the air conditioning of the small air-conditioned room plan, it is recommended: 1 hp Air Conditioner, dual temperature Air Conditioner, with dehumidification function. It is recommended to choose an Air Conditioner of regular well-known brands.