How to cut aluminum plate by laser cutting? What power is suitable?

Aluminum plate has always been the problem of laser cutting. The application of high antimaterials in today's processing and manufacturing industry is very extensive. Some types of laser tubes are difficult to complete such cutting, because aluminum plate is high antimaterials, its absorption rate of laser is low, and it is difficult to cut aluminum plate by laser. But because of its wide processing demand, we have to think about how to use laser Fast and safe cutting aluminum plate.

Due to the problem of light absorption rate of materials, many machines will break down during forced cutting, such as unstable operation or automatic shutdown, which seriously affects the service life and processing progress of the equipment.

Laser cutting aluminum plate can cut 6-8mm aluminum plate with a thickness of 2000W, 15mm aluminum plate with a thickness of 4000W and less than 20mm aluminum plate with a thickness of 6000W.

But now it is possible to process copper, aluminum and other high anti materials, but it needs higher power, so that there is no burr and crack in the cutting process, especially for cutting aluminum, it needs to cut at a proper speed, otherwise there may be cracks, and an appropriate increase in speed is an important method to avoid cracks on the premise of not affecting the quality. Like copper plate, aluminum plate and other high anti materials, laser equipment can also be cut.

In the process of aluminum plate processing, attention should be paid to some situations. Aluminum material is not resistant to high temperature, and burr is easy to occur during cutting. The processing technology needs to be debugged patiently. At the same time, attention should be paid to the speed that is not too fast, and burr is easy to occur during cutting. And the cutting speed that is too slow can cause cracks near the cutting mouth, which will also affect the cutting quality.