Advantages of fiber laser cutting machine

The advantages of fiber laser cutting machine are as follows:

1. High cutting accuracy: the positioning accuracy of laser cutting machine is 0.05mm, and the repeated positioning accuracy is 0.03mm.

2. Narrow slit: the laser beam is focused into a very small light point, so that the focal point reaches a high power density, the material is heated rapidly to the degree of gasification, and the evaporation forms a hole. With the relative linear movement of the beam and the material, the hole continuously forms a slit with a very narrow width, and the notch width is generally 0.10-0.20 mm.

3. The cutting surface is smooth: there is no burr on the cutting surface, and the roughness of the cutting surface is generally controlled within ra6.5.

4. High speed: the cutting speed can reach 10 m / min, and the maximum positioning speed can reach 30 m / min, which is much faster than that of wire cutting.

5. Good quality: no contact cutting, little thermal impact on the cutting edge, basically no thermal deformation of the workpiece, completely avoiding the edge collapse caused by material punching and shearing, and generally no secondary processing is required for the cutting seam.

6. No damage to the workpiece: the laser cutting head will not contact with the material surface to ensure that the workpiece is not scratched.

7. Not affected by the shape of the workpiece: the laser processing is flexible and can process any figure, and can cut pipes and other special shapes.

8. Cutting and processing of various materials: such as plastic, wood, PVC leather, textiles, plexiglass, etc.

9. Save mold investment: laser processing does not need mold, no mold consumption, no need to repair mold, save time to replace mold, thus saving processing costs, reducing production costs, especially suitable for processing of large products.

10. Material saving: with computer programming, products of different shapes can be cut to maximize the utilization of materials.

11. Improve the delivery speed of samples: after the product drawings are formed, the laser processing can be carried out immediately, and the new products can be obtained in the shortest time.

12. Safety and environmental protection: laser processing waste less, low noise, clean, safe and pollution-free, greatly improving the working environment.leapion