Introduction of Tube Laser Cutter Detailed Parts

Detailed Parts Launch of Tube Laser Cutter As a professional fiber laser machine maker,leapion LASER has over 14 years of experience in the manufacture of laser cutting machines and laser marking machines. leapion LASER has more than 14 years of experience in the manufacture of laser cutting machines and laser marking machines.

All aspects of the everyday life of people have been invaded by fiber laser.1. We recently received several orders for laser tube cutter, but most of them know little about laser tube cutter, so I made a description of detailed sections of laser tube cutter for customer reference.

1. Chunk fixed on the front.

The Front Chunk 2.Servo Engine

3.Motor Front Chunk Reducer

4. Front chunk deceleration belt

5. Moved chunk at the behind

6.Two Behind Chunk Servo Engines

Behind chunk 8.Deceleration belt of 7.Two reducers behind chunk 8.Deceleration belt

Firstly, we use 3 servo motors and 3 motor reducers, and 2 deceleration belts for the tube cutting.

Higher speed servo motor shaking, particularly for heavy tubes, will affect cutting precision,

The deceleration belt is the second way to decelerate, the first way to decelerate,

The cutting precision and effect will be ensured by these two pieces.

Secondly, we use the sealed chunk, maybe some factories use the open chunk of structure,

But the open-type accuracy is just 0.5 mm,

Our sealed chunk can achieve a higher-0.03mm accuracy,

The difference in working accuracy between one sealed chunk and the open form can be pictured.

The most important thing is that you want to cut pipes of various kinds, round, square, rectangle,

All sorts of tubes can be repaired by the sealed one but the open one is only for round pipes.

2. In addition, we use one set of rack and pinion, two sets of guide rails to ensure accuracy and stability of cutting.