Views: 38 Author: Site Editor Publish Time: 07-31-2021 Origin: Site
As we all know, the processing speed of the laser cutting machine is very fast, which can be described as "cutting iron like mud". The extremely hard metal will melt at the moment of contact with the laser cutting machine and be cut into various patterns. In fact, the size of the laser power will affect the cutting speed of the laser cutting machine, and the cutting speed of the laser cutting machine will affect the cutting quality. So, today, Leapion Laser takes everyone to learn about the impact of the cutting speed of the laser cutting machine on the cutting effect?
Under certain conditions of laser power, there is an optimal range of cutting speed. Too fast or too slow will affect the surface flatness of the cutting material.
1. If the cutting speed of the laser cutting machine is too fast, the time for the laser beam and the cutting material to contact each other is short, which may result in failure to cut and sparks.
2. If the cutting speed of the laser cutting machine is too fast, some areas of the material can be cut, but some areas cannot be cut.
3. If the cutting speed of the laser cutting machine is too fast, it will cause delamination of the entire cutting section.
4. If the cutting speed of the laser cutting machine is too fast, in addition to causing the material to be unable to be cut in time, the cutting section will show an oblique streak road, and the lower half will also produce melting stains.
1. If the cutting speed of the laser cutting machine is too slow, the interaction time between the cutting material and the laser will increase, causing the cutting plate to be over-melted, and the cutting section will be rough.
2. If the cutting speed of the laser cutting machine is too fast, the cutting seam will be widened accordingly, causing over-burning in the small rounded or sharp corners, and the ideal cutting effect will not be obtained.
3. If the cutting speed of the laser cutting machine is too fast, it will directly lead to low cutting efficiency and affect production capacity.
1. When the cutting speed of the laser cutting machine is reasonable: cutting sparks spread from top to bottom, the cutting surface is stable, and there is no slag at the bottom.
2. When the cutting speed of the laser cutting machine is too fast: the cutting sparks will tilt.
3. When the cutting speed of the laser cutting machine is too slow: the cutting sparks appear non-spread and less, condensed together.
The metal materials cut by the laser cutting machine are mainly divided into aluminum plates, stainless steel, carbon steel, copper plates and alloy materials. The characteristics of different materials are different, and the absorption rate of the laser is different, so in the case of the same thickness of the material, the cutting speed is different.
Generally speaking, the thicker the cutting material, the slower the cutting speed, and the laser cutting machine cuts the same thickness of high-reflection materials, the slower the cutting speed.
The power of the laser cutting machine is the most important factor that determines the cutting speed. The greater the power, the greater the laser energy and the faster the cutting speed. for example:
The 500W fiber laser cutting machine can cut carbon steel at a maximum speed of 13m/min, while the 1000W fiber laser cutting machine can cut carbon steel at a maximum speed of 24m/min;
The 500W fiber laser cutting machine can cut stainless steel at a maximum speed of 14m/min, while the 1000W fiber laser cutting machine can cut stainless steel at a maximum speed of 24m/min;
Therefore, when cutting different thicknesses and different materials, it is critical to select different parameters and adjust the cutting speed. The cutting speed of the laser cutting machine has a huge influence on the cutting effect. Properly adjusting the cutting speed can not only improve the quality of cutting, but also increase the processing efficiency of the enterprise, thereby bringing more benefits. But note that we can't give up cutting quality because of Tukuai Tu's capacity.
Let me share so much today. If you have any other questions about the laser cutting machine, welcome to consult Leapion Laser. Leapion Laser has more than 12 years of industry experience, Leapion Laser 7×24 hours online service!
