Views: 26 Author: Site Editor Publish Time: 11-09-2021 Origin: Site
As we all know, the normal operation of woodworking engraving machine is inseparable from daily maintenance and maintenance. With the advent of winter, many customers are very concerned about how to maintain and use woodworking CNC engraving machines in winter. In particular, customers in the northern region are particularly concerned. Below, Leapion Laser shares how to maintain the cold water spindle of the woodworking engraving machine in winter.
1. Ensure the ambient temperature in the operation room, at least the staff will not be very cold;
2. Check the applicable temperature of the refueling standard, and at least reach the lowest temperature;
3. When the machine is not in use, if the room temperature is low, it is best to pour out the water in the water tank of the Speedmaster engraving machine to prevent freezing and cracking of the water tank and water pipe.
The temperature does not have a great impact on the woodworking engraving machine. However, because many customers add butter to the lead screw and forget to clean it in winter, it will not run every time it is turned on. The temperature in some studios is very low, although the oil is added. But it still freezes and the machine can't run, so the workshop temperature is very important.
1. Cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is too dirty, it will cause serious damage to the motor. Ensure that the cooling water is clean and the pump works normally.
2. Pay attention to the water level, and never make the water-cooled spindle motor lack water, so that the motor heat cannot be discharged in time. Circulate water as much as possible. If you work for a long time, you can choose to use a large-capacity water tank.
3. Pay attention to the ambient temperature, especially in winter, be careful of freezing and cracking of the water tank and water pipe due to the water temperature being too cold.
1) Drain the water in the water tank thoroughly to prevent cracking of the water tank and pipeline
2) If possible, it is recommended to use antifreeze for cooling.
4. The cooling water should be replaced regularly. In case of high temperature, the cooling water should be kept clean.
1. First, clean up the guide rail and the lead screw. Use a cloth (without hair removal) to clean up the oil stains and material scraps on the guide rail and the lead screw. Because the temperature is low, you can add oil to both the guide rail and the lead screw, and it is best to add antifreeze oil.
2. The refueling cycle is twice a month, that is, refueling once every two weeks.
3. If the machine is not used for a long time, it should be refueled and run empty regularly to ensure the flexibility of the transmission system.
4. Walk back and forth slowly after adding the oil to ensure that the lubricating oil can be evenly added to the guide rail and the lead screw.
The above three points are very important for the maintenance and maintenance of the cold water spindle of woodworking CNC engraving machine in winter. Especially the first temperature maintenance should be done well in winter, and the workshop temperature is too low, and you should always pay attention to whether the water tank is frozen or not. For more information and professional questions about woodworking engraving machines, please contact Leapion Laser.
