Views: 24 Author: Site Editor Publish Time: 01-17-2022 Origin: Site
Nowadays, laser marking machine has been widely used in the market because of its advantages of good marking effect and strong stability. We should pay special attention to the maintenance of laser marking machine in the process of using laser marking machine. Today Leapion Laser shares some tips for extending the life of laser marking machines.
1. When the laser marking machine is working, the working width should be higher than the operating width;
2. Do not start the laser marking machine when the water circulation is improper;
3. When the light pen of the laser marking machine is in operation, it must not touch the beam;
4. When preparing to turn off the marking machine, the current must be set to a high level;
5. When the laser marking machine is in operation, once a fault is found, it needs to be stopped immediately to avoid casualties;
6. After the laser marking machine is used for a period of time, it is necessary to wipe off the dust on the surface with a clean dry rag;
7. The laser is the core of a laser marking machine. It must be moved carefully to avoid being broken due to improper movement;
8. The field lens will become blurred after a long time, or there is dust, etc., use a clean absorbent cotton dipped in alcohol to wipe the lower surface of the lens until there is no dirt on the surface of the lens;
9. After the laser marking machine is stopped for half an hour, clean up the items and residues on the working sheet. It is necessary to cover the equipment with a clean cloth to prevent dust from entering the inside of the equipment.
1. The installation site of the equipment should be kept clean, free of dust and oil, no vibration and electromagnetic interference, and a certain space for operation and maintenance should be reserved.
2. The ambient temperature at the installation site of the laser marking machine should be controlled at 5-35°C, and the humidity should not be greater than the number changed to Chinese characters, otherwise an air conditioner needs to be installed.
3. The power supply capacity and wire of the laser marking machine need to meet the equipment requirements, the voltage fluctuation should not be greater than the number of Chinese characters, and there is a reliable grounding wire to prevent damage to the equipment due to excessive voltage or leakage.
4. Machines using cooling water should ensure that the water quality of the cooling water is clean, and the cooling water should use pure distilled water or deionized water, but for semiconductor lasers, pure distilled water should be used instead of deionized water, and the cooling water should be replaced once a month.
5. Do not operate the laser marking machine for a long time or overload.
6. Follow the steps to power on and off. The marking machine should be turned on according to the steps. After the equipment is finished, it should be turned off according to the shutdown steps, and the main power supply should be turned off.
The daily maintenance of the laser marking machine is the basic work of equipment maintenance. It must be institutionalized and standardized, and the random operation should not cause irreversible damage to the equipment. For more information and inquiries about laser marking machines, please pay attention to Leapion Laser.
