Views: 24 Author: Site Editor Publish Time: 10-22-2021 Origin: Site
As we all know, because there are many kinds of CNC milling cutters used for woodworking, and there are also many kinds of milling cutters used for CNC milling cutters, we have previously shared how to choose the right tool for woodworking engraving machines. Today, Leapion Laser will share how to correctly use the milling cutter of a woodworking engraving machine.
1. The size of the jacket should be appropriate. Jackets with cross-sections, not round, worn, and tapered in the inner hole must not be selected, otherwise it will cause a sensation in the tool handle and fail to make aspirations.
2. The knife handle should touch the jacket gently, and the knife handle should be pierced into the jacket firmly and tightened. If the jacket has been used for a long time, the inner hole is deformed, it is necessary to replace the jacket immediately.
3. Always check the patience of the tool. If you use it bluntly, please replace it immediately. If you continue to use it, not only does the carving work poorly, but it will also break the knife.
4. When using woodworking CNC engraving machine, pay attention to that the thickness of the processed material cannot exceed the thickness of the cutting edge, otherwise the knife will be broken or the engraving effect will be unsatisfactory.
5. For the cutting of different materials, it is necessary to select different tools and adjust the cutting speed reasonably.
6. During the working process of the engraving machine, the high-speed rotating knives are very sharp. Pay attention to the body, clothes and hair not close to the objects in the work to prevent accidents.
7. The recommended cutting speed should be balanced, and the speed should be consistent as much as possible to achieve a very good effect. The cutting is too long to stay, and the iron must be hit while it is hot.
8. The knives should be cleaned with special cleaning agents.
9. When the knives are not in use, applying butter can prevent the knives from rusting.
10. The tool cannot be polished or changed shape by itself.
1. Sharp knife
It is characterized by high machining accuracy, good chip removal, and not easy to break the tip. Its processing efficiency and quality are beyond the reach of ordinary sharpeners.
2. Long-blade flat-bottomed sharp knives Special extended-blade flat-bottom sharp knives: This is especially suitable for the finishing of multi-head engraving machines.
3. Single-edge acrylic milling cutter with high-capacity spiral chip flute, mirror sharpening process design, combined with ultrafine tungsten steel cutter body, especially suitable for high-efficiency mass production of acrylic, PVC, plastic, cork, density board, etc.
It is a truly environmentally friendly engraving tool without sticking to the knife, smokeless, odorless, and silent during processing.
4. Single-edge solid wood milling cutter
This tool adopts a small helix angle design, better chip removal, fine ribs on the back, better rigidity, when processing solid wood and high-density boards, it has good cutting force and does not burn the knife.
5. Single-edged aluminum milling cutter
This is most suitable for engraving machines to process and cut various aluminum plates. It can ensure that the engraving machine does not stick to the knife during the high-speed cutting process of the engraving machine, and the processing efficiency is high.
6. Round-bottomed sharp knife
This carving tool is the first choice for precision small and small deep relief. It is especially suitable for fine relief processing of acrylic, hardwood, density board, aluminum, and copper; the tool consistency is good, and it is the most excellent working partner for precision carving machines and multi-head engraving machines.
7. Double-edged large chip removal density plate milling cutter
This tool is particularly suitable for processing low- and medium-density boards. It has the characteristics of good chip removal, no black knives, no burning, and high processing efficiency.
8. High-precision column cutters are especially suitable for processing PPM, special plastics, LCD panels, etc.
9. Double-edged milling cutter without blade.
The cutting edge is sharp, suitable for processing acrylic without sticking to the knife. Cost-effective.
Disadvantages: The processing sound is loud, and the product finish is not very good.
If you want to know more about other CNC engraving machines, please contact Leapion Laser directly.
