Advantages of acrylic cutting laser machine

Advantages of acrylic cutting laser machine

Laser cutting machine acrylic, Laser cutting machine is one of the most representative laser cutting devices. Now it has an outstanding success in every industry

Laser cutting is applicable to all forms of materials. So what are its uses and advantages for the cutting of acrylic (organic glass)? Today, let me introduce that in more detail

Cutting acrylic (organic glass) with laser cutting machines has clear advantages. Such as rapid speed, high precision and precise positioning. It is used in acrylic art presents, acrylic display frames, acrylic picture frames, display items, packaging boxes and other industries, and it plays an irreplaceable position.

Comparison of laser cutting to traditional mechanical cutting

First of all, this is a one-step and monotonous method of processing. So the edges are smooth and neat, no need for subsequent cleaning and polishing. Moreover, the laser concept is high power, natural tempering edge, so there are no pleasant cracks. Using this process, cracks and damage were avoided, thus reducing the faulty rate and increasing the output.

Limit to

Laser acrylic cutting. There are three factors that restrict the speed of cutting:

(1) thickness;

(2) coefficient of thermal expansion of materials,

(3) Laser output power. Even in the application of speed, however.

This disparity would also be compensated for by the economic and quality advantages of laser cutting.

We all believe in the further processing and cutting of lasers.

So with higher output power, the processing speed would be increased by two to three times.

Improved impact

And the cracks are precisely mapped by the laser beam.

So the laser separation will cut out very detailed curved patterns.

Probably, the experiment we did confirms it.

That laser cutting can continuously and precisely complete the set pattern,

Repeatable can exceed +50 m m, regardless of line or curve.

The laser will also allow a precise cutting of curves and three-dimensional figures.

Low power consumption

Low power consumption: 100W laser tube total power (power consumption) about 1-2 kw/h,

depending on the specific model:

1300x2500mm machine with gantry (such as woodworking engraving machine modeling) about 2 kw/h;

1300x1000mm power consumption is about 1 kw/h.

Laser machine power consumption is much smaller than the engraving machine.