What are the advantages of fiber laser marking machine when marking PVC materials?

PVC material is a kind of colorless crystalline vinyl polymer material, this kind of material has good resistance to oxidants, reducing agents and strong acids. With its light weight, corrosion resistance, high compressive strength, and convenience, it has been seen everywhere in our lives. Fiber laser marking machines are often used for marking PVC materials. Below, Leapion Laser shares the advantages of laser marking PVC.

What are the advantages of fiber laser marking machine in marking PVC materials?

1. The marks processed on PVC by traditional marking methods are easy to fade and fall off, cannot be maintained for a long time, and it is even difficult to pass environmental protection inspections. But the fiber laser marking machine marking PVC pipe can ensure the durability of the mark;

2. The fiber laser marking machine will not affect the workpiece, it is environmentally friendly, and there is no public hazard and pollution;

3. The fiber laser marking machine can perform 360-degree flexible marking, can mark large workpieces, and can easily mark large-volume such as PVC pipes, with less error and stable performance.

4. The fiber laser marking machine can also cooperate with the production line for automatic marking, which saves a lot of labor and cost, and improves efficiency.

5. Optical fiber laser marking machine is widely used for PCB erase board, chip opening, wire stripping, metal metal, plastic lettering, etc.

6. The wavelength of fiber laser is 1064nm, but this wavelength can be marked black, which is the most acceptable color for customers. It can be clearly engraved on the PVC material and appears black. The fiber laser is considered to be the best laser to replace the semiconductor laser.

7. Because the frequency of fiber laser marking machine can reach 80K, the spot is very small, and the galvanometer with small spot can reach very high speed, and the speed of the marking line can reach or exceed the effect of CO2 laser.

Generally speaking, near-infrared laser and far-infrared laser are used for marking on PVC materials.

Infrared laser marking machine: the most common is carbon dioxide laser marking machine, infrared laser marking machine: the most common is carbon dioxide laser marking machine.

The wavelength of the carbon dioxide laser marking machine laser is 10.6u. This type of marking machine can print yellow-red writing on PVC materials. Due to the function of the carbon dioxide laser, it can be very large, such as the current general 30W power marking machine and 50W power marking machine, so this type of marking machine can mark at a very high speed, it is very suitable for processing on the assembly line, instead of not so environmentally friendly ink printing.

It can be seen that the fiber laser marking machine has obvious advantages in marking PVC materials. For more information and content about fiber laser marking machine, please pay