The relationship between the quality of laser cutting machine and cutting speed

Laser cutting machine occupies a very large area in the industrial manufacturing industry. Many metal materials, whether stainless steel, carbon steel or alloy materials, can be cut without deformation.

The best cutting speed range of metal cutting machine can be selected according to the equipment instructions or determined by tests. Due to the different thickness, material, melting point, thermal conductivity and surface tension after melting, the cutting speed also changes accordingly.

In fact, the cutting speed of laser cutting machine is very important. The best cutting speed range can be selected according to the equipment instructions or determined by tests. Due to the thickness of materials, different materials, melting point, thermal conductivity and surface tension after melting, the cutting speed also changes accordingly.

Main cutting advantages of metal cutting machine:

1. The quality of the incision can be improved by increasing the cutting speed moderately. The incision is narrowed slightly, the surface of the incision is smoother, and the deformation can be reduced at the same time.

2. The cutting speed is too fast to make the cutting energy lower than the required value. The jet in the cutting seam can not blow off the molten cutting melt immediately and form a large amount of drag. Along with the slag hanging on the incision, the surface quality of the incision decreases.

3. When the cutting speed is too slow, the laser beam irradiates the surface of the material for a long time, so that the incision becomes wider. The molten materials on both sides of the incision gather and solidify at the bottom edge, forming slag hanging which is not easy to clean. Moreover, the upper edge of the incision forms fillet due to too much heating and melting.

In order to meet the higher and higher requirements of industrial production for quality and production efficiency, we must pay attention to solving various key technologies and implementing quality standards, so that this new technology can be more widely used in China.

The laser cutting material has no burr, smooth surface and high precision, which is superior to CNC punch and plasma cutting. It is understood that because of the slow cutting speed and poor cutting quality of the optical fiber laser cutting machine, more attention should be paid to the maintenance and daily maintenance of the laser cutting equipment. Only in this way can the work efficiency, product quality and economic benefit be guaranteed to the maximum extent. For more details of laser cutting machine, please pay attention to leapion laser.