One minute understanding of all components of laser cutting machine and its work

laser cutting machine Laser power supply: it supplies high-voltage power for laser vibration. The laser produced is guided by the reflector and light guide system to the direction required for cutting workpiece.

Laser oscillator: the main equipment for producing laser

Refractor: used to direct the laser in the desired direction. In order to keep the beam path from failure, all mirrors should be protected with protective covers.

Cutting torch: cutting torch mainly includes gun body, focusing lens, auxiliary gas nozzle and other parts.

Cutting working platform: used to place the workpiece to be cut, and can move correctly and accurately according to the control program, usually driven by the servo motor

Cutting torch driving device: it is used to drive the cutting torch along x-axis and z-axis according to the program, and is composed of servo motor, screw rod and other driving parts.

CNC device: control the movement of cutting platform and cutting torch, and also control the output power of laser.

Operation panel: used to control the working process of the whole cutting device.

Gas cylinder: including laser working medium gas cylinder and auxiliary gas cylinder, which are used to supplement working gas of laser vibration and auxiliary gas for cutting.

Cooling water circulation device: used for cooling laser oscillator. A laser is a device that converts electrical energy into light energy. For example, the conversion efficiency of CO2 gas laser is generally 20%. The remaining 80% of energy is converted into heat. The cooling water takes the extra heat away to keep the oscillator working properly.

Air dryer: used to supply clean dry air to the laser oscillator and beam path, so as to maintain the normal operation of the path and reflector.leapion