Article List

• How to clean up the dust of laser cutting machine?

  Nowadays, as one of the most common metal cutting methods, laser cutting machines have been widely used in all walks of life. In the daily use of laser cutting machine, it is inevitable that a certain amount of dust will be generated. After these tiny soot particles are produced, they will float in

  Laser Cutting Machine Blog October 02, 2021
• Why do we need to blow the air correctly during laser welding?

  The scope of application of laser welding machine is more and more extensive, but the requirements are also getting higher and higher. It is necessary to blow air during the welding process to ensure that the product welding effect is beautiful and white. In laser welding, shielding gas will affect weld formation, weld quality, weld penetration depth and penetration width, etc. In most cases, blowing shielding gas will have a beneficial effect on the weld, but it is not used properly. Good may also bring unfavorable effects. So how to use air blowing correctly in the metal laser welding process? Let’s share with you Leapion laser below:

  Laser Welding Machine Blog October 01, 2021
• What are the tips for using laser marking machine?

  Laser marking is the use of laser beams to make permanent marks on the surface of various materials. It has been widely used in various industries, especially in some occasions that require finer and higher precision. In order to ensure the smooth operation of the laser marking machine, we can properly understand some of the use of laser marking machine tips or maintenance tips during operation, which can make the laser marking machine have a longer service life and run more stable. Let's share with you Leapion Laser below.

  Laser Marking Machine Blog September 30, 2021
• How to choose the appropriate auxiliary gas when the laser cutting machine cuts carbon steel?

  As we all know, the laser cutting machine must use auxiliary gas to assist the operation during the cutting process. Different auxiliary gases are suitable for cutting metal sheets of different materials and thicknesses. Common auxiliary gases for laser cutting include oxygen, nitrogen, and air. So, what is the difference between these three gases when cutting carbon steel? Today Leapion laser will analyze it.

  Laser Cutting Machine Blog September 29, 2021
• How to determine the laser cutting process parameters?

  The laser cutting machine is mainly composed of laser, light guide system, numerical control motion system, automatic height adjustment of the cutting head, working platform and blowing high-pressure gas systems. Many parameters affect the laser cutting process, some of which depend on the technical performance of the laser and machine tool, while other parameters are variable. Next, Leapion Laser shares how to determine the main parameters of laser cutting.

  Laser Cutting Machine Blog September 28, 2021
• How to solve the problem of unsatisfactory processing effect of laser cutting machine?

  Laser cutting machines are now the preferred processing equipment for many metal processing sites. The main reason is that laser cutting machines have good cutting effects and efficiency. However, some people think that the laser cutting machine is easy to use, and some are not easy to use, especially for the novices who have just entered the field of laser cutting machines, and they don't know how to solve the problem when the laser cutting machine processing effect is not ideal. Let's analyze it with Leapion laser.

  Laser Cutting Machine Blog September 27, 2021
• What are the types of laser engraving?

  Laser engraving machine is an advanced equipment that uses laser to engrave materials that need to be engraved, and it is now widely used. The use of laser engraving machine can improve the efficiency of engraving, make the surface of the engraved place smooth and round, quickly reduce the temperature of the non-metallic material to be engraved, and reduce the deformation and internal stress of the engraved object. In fact, Jianggan District Technology can be used for both carving and cutting. Below, Leapion Laser shares 3 types of laser engraving.

  September 26, 2021
• How to set the most appropriate cutting speed of the laser cutting machine?

  As an advanced processing equipment, laser cutting machine has the advantages of less material waste, obvious cost effect in large-scale production, and strong adaptability to processing objects. It is currently widely used in various industries. The continuous on-line of the high-performance state of the laser cutting machine is closely related to the setting of the cutting speed of the equipment. Today Leapion Laser shares how to set the appropriate cutting speed for the laser cutting machine.

  Laser Cutting Machine Blog September 25, 2021
• Why can laser cutting machines be used in the metal furniture industry?

  With the pursuit of environmental protection, metal furniture and metal customization have attracted more and more consumers' attention. At present, metal furniture is more and more common in daily life. Whether in homes or public spaces, metal furniture is beautiful, durable, and easy to clean. It has gradually replaced traditional wooden furniture and has become the new favorite of households. Laser cutting machines have also been applied to the metal furniture industry, so why can the laser cutting machine technology be perfectly applied to metal furniture?

  Laser Cutting Machine Blog September 24, 2021
• What is the method of adjusting the optical path of the fiber laser marking machine?

  I believe everyone has experienced that when fiber laser marking machine is in use, sometimes the light path is not straight or the light path is uncontrolled and distorted. If you want a laser marking machine to achieve the perfect effect of marking and processing, we must understand its internal structure and basic operating methods. Below, Leapion Laser shares the 7 major steps and methods for adjusting the optical path of a fiber laser marking machine.

  Laser Marking Machine Blog September 23, 2021