The whole machine adopts stainless steel structure, beautiful and solid
PLC computer control, servo drive, fully automatic
Photoelectric raw material detection, avoid mistakes and reduce waste
Stable performance and low failure rate
Moel No. | LMS-120-1 | LMS-120-2 |
Volume of production | 60 pieces/minutes | 120 pieces/minutes |
Equipment size | 6500mm (L) × 4500mm (W) × 1900mm (H) | |
Appearance color | standard color, follow this standard without special instructions | |
Equipment weight | ≤5000kg, ground load ≤500KG / m2 | |
Working power | equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW | |
Compressed air | 0.5 ~ 0.7 MPa, the use flow rate is about 300L / min | |
Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (Cleanliness is not less than 100,000) | |
Total power | 8.5KW | |
Operator | 1 person [additional staff of 1-2 for temporary model] |
Moel No. | LMS-120-1 | LMS-120-2 |
Volume of production | 60 pieces/minutes | 120 pieces/minutes |
Equipment size | 256inch (L) × 177inch (W) × 74.8inch (H) | |
Appearance color | standard color, follow this standard without special instructions | |
Equipment weight | ≤5000kg, ground load ≤500KG / m2 | |
Working power | equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW | |
Compressed air | 0.5 ~ 0.7 MPa, the use flow rate is about 300L / min | |
Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (Cleanliness is not less than 100,000) | |
Total power | 8.5KW | |
Operator | 1 person [additional staff of 1-2 for temporary model] |