Views:0 Author:heyu Publish Time: 2020-05-09 Origin:Leapion fiber laser cutting machine
Metal laser cutting machine is an important problem for many metal laser cutting machine manufacturers. High reflective metal materials have always been difficult to cut by metal laser cutting machine, including copper, aluminum, etc., which are also common materials in our daily processing.
For the cutting of copper products, many workers have a lot of problems with the specific operation and parameter adjustment of metal laser cutting machine. Cutting is not only using machine cutting, but also requires some experience. Let's introduce how to cut copper materials with metal laser cutting machine.
When it is necessary to add auxiliary gas for cutting high reflective metal materials, when the laser cutting machine cuts metal copper, the added auxiliary gas reacts with the material under high temperature conditions, and increases the cutting speed. For example, the combustion supporting effect can be achieved by using oxygen. For laser cutting equipment, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1 mm, metal laser cutting machine can be used for processing.
Therefore, when using the metal laser cutting machine, do not worry about whether it can be cut off, at this time, we should pay attention to the processing effect, so nitrogen is the best auxiliary gas. When the thickness of copper metal reaches 2 mm, it is impossible to process with nitrogen. At this time, oxygen must be added and oxidized to realize cutting.
Through the above explanation, you should know how to use the metal laser cutting machine to make copper materials. In fact, what we pay attention to when we are cutting is not whether we can finish cutting the materials and how much to cut in an hour, but the problem of cutting accuracy. How to grasp the cutting accuracy of metal laser cutting machine is the most important.
The data are for reference only