2) Check the straightness of the track of the fiber laser cutting machine and the verticality of the machine every six months, and find that the maintenance and debugging are not normal. If you don't do this, it is possible that the effect of cutting out is not so good, the error will increase, and the cutting quality will be affected. This is a top priority and must be done.
3) Use a vacuum cleaner to absorb dust and dirt from the machine once a week. All electrical cabinets should be kept clean and dustproof.
4) Always check the fiber strip of the fiber laser cutting machine to ensure tension. Otherwise, if there is a problem in the operation, it may hurt people and seriously lead to death. The steel strip looks like a small thing, and the problem is still a bit serious.
5) The guide rails of the fiber laser cutting machine should be cleaned frequently to eliminate dust and other debris, to ensure that the normal rack of the equipment should be wiped regularly, and the lubricating oil is added to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better during the process of travel, more accurate cutting, and the quality of the cut products will be improved. . Laser cutting laser cutting